You are here: Home > Woodworking > Furniture Applications
Below is a suggested list of Festool products that are used for the various types of furniture building.  Tools such as the Domino are invaluable as they can cut your labor time down by as much as 70%.  Some award wining furniture has been produced using the tools from this list.
Sort By:
Page of 5  
C12 Cordless Drill/Driver Set - 1.3 Ah
Our Price: $460.00

Offset, right angle, and runnout free straight drilling capabilities in one systainer.
Domino DF 500 Set + CT 33 PKG
Domino DF 500 Set + CT 33 PKG
Our Price: $1,304.00

Make flawless, dustless,  mortises every single time; utilize the indexing fence for efficiency on larger pieces, and the face plate for mortises in end grain as small as 7/8".
Handle, CT22/33
Our Price: $70.00

Our most requested dust extractor accessory.
Filter bag 5x, CT33
Our Price: $34.00

Pack of five bags with easy to use plug to eliminate mess during disposal.
Spiral blade standard, HL850
Our Price: $28.00

Fast and easy alignment with this standard head replacement spiral blade.
Spiral blade fine for HL850 Hand Planer
Our Price: $30.50

Fast and easy alignment with this Rustic fine head (484521) replacement  blade.
Spiral blade coarse for HL850 Hand Planer
Our Price: $30.50

Replacement blade for rustic cutter head (484522).
Fine Planer Head for HL850 Hand Planer
Our Price: $135.00

Create a rustic finish with this planer head.
Coarse Planer Head for HL850 Hand Planer
Our Price: $135.00

Create fluted designs in wood.
Angle Fence for HL850 Hand Planer
Our Price: $85.00

Use with the bench unit or on the planer for angles of 0 - 45 degrees.
Undulating head for HL850 Hand Planer
Our Price: $135.00

Hand hewn look with the speed of a power planer.
Undulating Spril Blade for HL850 Hand Planer
Our Price: $31.50

Fast and easy alignment with this Rustic undulating (485331) head replacement blade.
Jigsaw blade S 75/2.5 5x, PS2
Our Price: $9.00

Multipurpose conically ground blade provides clean cuts on various material.
Systainer Port 1000/2
Our Price: $542.00

Secure your tools to a shop wall or installment van using the Systainer Port system with integrated shelve locks for overnight storage without fear of theft.
PS 300 EQ Barrel Grip Jigsaw
Our Price: $295.00

Straight cuts every time!
PSB 300 EQ D-Handle Jigsaw
Our Price: $295.00

Straight cuts every time!
TS 55 EQ Plunge Cut Saw
Our Price: $475.00

Panel saw quality cuts with the portability of a circular saw.
Jigsaw blade S145/4FSG 5x, PS2
Our Price: $24.50

4 3/4" perpendicular cuts in wood.
Splinter guard Jigsaw 5x, PS 300
Our Price: $6.00

Zero clearence inserts that ensure splinter free cuts (5 pack).
Splinter guard 5x, TS 55/TS 75
Our Price: $16.00

Ensures splinter free cuts on the right side of the blade.
   
 
Miscellaneous Tips:

1. Always wear eye and ear protection
2. Test a scrap piece of the same material with sandpaper, stains, etceteras before applying to your project
3. If plywood is to be used, AA grade is preferred but AB grade is acceptable
4. Try to use EXP or FAS lumber when available, otherwise quarter sawn vertical grain wood is acceptable
5. Let the sander do the work (don’t bear down), it will sand faster on its own
6. Don’t skip grits, and between grits wipe off the surface to eliminate the potential for swirl marks
7. In corners and edges, use orbital or linear sanders to sand with the grain